| Precautions for accident vehicle |
Electric vehicle includes a high voltage battery, which can lead to serious accidents such as short
circuits or electric shocks if touched incorrectly. Be sure to observe all of the following below.
|
| 1. |
Personal Protective Equipment (PPE)
(Refer to High Voltage System General Safety Information and Caution -
"Personal Protective Equipment (PPE)")
|
| 2. |
Boric Acid Power or Solution
|
| 3. |
ABC Extinguisher
|
| 4. |
Towel for cleaning electrolyte
|
| 5. |
Fire blacket
|
| 6. |
Vinyl tape (for insulating terminal)
|
| 7. |
Mega ohm tester (for checking high voltage)
|
| 1. |
Before handling an accident vehicle, the technician has to wear Personal Protective Equipment (PPE).
(Refer to High Voltage System General Safety Information and Caution -
"Personal Protective Equipment (PPE)")
|
| 2. |
Never touch the power cable from which the insulating coating has been peeled off.
|
| 3. |
Since the gas is hydrogen and alkaline vapor, immediately ventilate the room and evacuate to a safe place.
|
| 4. |
If the leaked liquid comes in contact with skin, immediately neutralize the affected area with boric acid
solution, then cleanse with tap water or salt water.
|
| 5. |
Refer to "High voltage shut-off procedure" if the high voltage needs to be shut off.
(Refer to Battery Control System (Long Range) - "High Voltage Shut-off
Procedures")
|
| 6. |
After an accident, check the high voltage battery sensor data (insulation resistance, voltage deviation
between cells, DTCs, etc.) and internal damage.
|
| 7. |
When replacing the high voltage battery with a fine deformation, only the case is exchanged after checking
the change in the high voltage battery sensor data.
|
| 8. |
Determine the type of accident and the your vehicle repaired as follows.
|
Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Change of distance to empty when 100% charging
If the estimated distance to empty decreases because the Kia EV6 has adapted to your driving style or environmental conditions, the estimated range may increase again when the vehicle is driven according to efficient driving practices. The distance-to-empty value can be reset by a workshop, but this does not increase the actual battery range.Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: How to turn off Smart function while operating
Press the Parking/View button () during either of the following stages: Checking available exit space. Selecting the desired exit direction. Shift the transmission into R (Reverse) during either of the following stages: Checking available exit space. Selecting the exit direction.