Kia EV6: Charging door operation / Rear seat headrest
Contents:
The Kia EV6 rear seats are equipped with adjustable headrests for all passenger seating positions to improve both comfort and occupant protection.
|
The Kia EV6 rear headrests help improve passenger comfort while also helping reduce the possibility of neck injuries during rear-impact collisions.
For maximum effectiveness, the center portion of the Kia EV6 headrest should be positioned at approximately the same height as the occupant’s head center of gravity.
For most people, this position is approximately level with the top of the eyes.
The Kia EV6 rear headrest should also be positioned as close to the passenger’s head as possible for improved support and safety.
Using cushions or accessories that move the passenger away from the Kia EV6 seatback is not recommended.
Adjusting the height up and down
|
-
To raise the Kia EV6 rear headrest, pull it upward to the desired height position (1).
-
To lower the Kia EV6 rear headrest, press and hold the release button (2) on the headrest support while lowering the headrest carefully to the desired position (3).
Removal and reinstallation
|
|
-
To remove the Kia EV6 rear headrest, raise it completely and press the release button (1) while pulling the headrest upward (2).
-
To reinstall the Kia EV6 rear headrest, insert the headrest poles (3) into the mounting holes while pressing the release button (1).
-
After installation, adjust the Kia EV6 rear headrest to the proper height and verify that it locks securely into place.
WARNING
Headrest Reinstallation
To reduce the risk of injury to the head or neck, always ensure the Kia EV6 rear headrest is properly installed, securely locked, and adjusted correctly after reinstallation.
Other information:
Range guide Distance to empty Distance to empty (low energy economy) Energy economy gauge Distance to empty (high energy economy) The Kia EV6 Range Guide is designed to help drivers achieve more efficient and economical electric driving by analyzing current energy usage and historical driving data.Emergency Stop in the Kia EV6 is designed to assist when the system determines that the driver may be unresponsive. When this condition is detected, the system helps keep the vehicle centered in the lane and supports controlled deceleration so the vehicle can be brought to a stop more safely within the driving lane. Detection sensor For the sensors used by this function and their exact locations on the Kia EV6, refer to the Detecting sensor(s) section.
Contents
Categories
- Manuals Home
- Kia EV6 Owners Manual
- Questions & Answers
- Video Guides
- Useful Resources
- New on site
- Most important about Kia EV6
- Privacy Policy
