Kia EV6: Advanced Driver Assistance System (ADAS) / Advanced Driver Assistance System (Parking)
Contents:
Components and Components Location. Wide Angle Camera Specification
Components and Components Location
1. Wide Angle Front Camera 2. Wide Angle Side
Camera 3. Wide Angle Rear Camera 4. Front Ultrasonic Sensor
|
5. Rear Ultrasonic Sensor 6. Front Corner Ultrasonic
Sensor 7. Rear Corner Ultrasonic Sensor
|
Wide Angle Camera Specification
Item
|
Specification
|
Rated voltage (V)
|
6.7
|
Operating voltage (V)
|
6.2 - 7.2
|
Quantity
|
RVM
|
1
|
BVM, SVM
|
4
|
Wide Angle Camera Description and Operation
| Description and Operation |
Item
|
Name
|
Function
|
Driving Safety
|
Blind Spot View Monitor (BVM) BVM (Blind-Spot View Monitor)
|
When operating the turn signal switch, the rear side view is displayed on the cluster.
|
Parking Safety
|
Rear View Monitor RVM (Rear View Monitor)
|
RVM displays the rear view during driving and parking.
|
Surround View Monitor SVM (Surround View Monitor)
|
SVM displays the surrounding view during driving and parking.
|
Wide Angle Camera On Vehicle Inspection
Visual inspection
If the function of RVM, SVM, PCA, or RSPA is not operable or DTC occurs, check the following below.
| 1. |
Check the cleanliness of the wide angle camera mounting location.
|
•
|
If the wide angle camera lens is contaminated with snow, dust, or stickers, the performance may
deteriorate.
|
|
•
|
If the wide angle camera lens glass is damaged, the performance may deteriorate.
|
|
| 2. |
Check the condition around the wide angle camera.
|
•
|
If a door or trunk (tailgate) equipped with a wide angle camera is opened, an abnormal screen may
be displayed.
|
|
| 3. |
Check the shape and condition of the wide angle camera mounting location.
|
•
|
If the vehicle is tilted due to cargo loading, etc. the accuracy of parking guidelines and SVM top
view may be reduced.
|
|
•
|
If moisture enters the wide angle camera lens, performance may deteriorate.
|
|
| 4. |
Check the wide angle camera and driver assistance parking controller in case of a trouble code.
|
•
|
Check for damage to the wide angle camera, ADAS parking ECU.
|
|
•
|
Check connection status to the wide angle camera, ADAS parking ECU connector and wiring.
|
|
| 5. |
Check the button operation.
|
•
|
For RVM/SVM specification, press the parking view button (A) below 1 second to check RVM/SVM screen
is properly displayed.
|
|
•
|
For RSPA specification, press the parking view button (A) 1 second or above to confirm RSPA
operating status.
|
|
Check for poor picture image quality of wide angle camera
Symptom
|
Suspected Cause
|
Dirty lens
|
Damaged lens
|
Airtightness failure
|
|
Blurry and display quality trouble
|
Exterior stain
|
Lens coating peeled
|
Inflow of water in lens
|
Countermeasure
|
Clean the exterior of wide angle camera
|
Replace the wide angle camera
|
Replace the wide angle camera
|
Symptom
|
Suspected Cause
|
Dirty lens
|
Damaged lens
|
Airtightness failure
|
|
Any object or line on monitor
|
Exterior stain
|
Lens crack
|
Crack and inflow of water
|
Countermeasure
|
Clean the exterior of wide angle camera
|
Replace the wide angle camera
|
Replace the wide angle camera
|
|
•
|
Check whether the vehicle is equipped with a genuine wide angle camera or not.
|
|
–
|
If the vehicle is not equipped with a genuine wide angle camera, it will result in low-quality
images or malfunction.
|
|
•
|
Warranty repair is not available for the replacement of the wide angle camera in case of
malfunction due to negligence in use (cleaning with detergent, impact from foreign substances) or
non-genuine installation.
|
|
•
|
Be sure to clean it with water or a clean cloth when cleaning the exterior of the wide-angle camera
lens.
|
|
•
|
Check whether the same defect occurs after checking the surface condition of the wide-angle camera
lens and removing foreign substances.
|
|
•
|
The coating of the wide angle camera lens may be peeled off when washing the car with a strong acid
cleaner.
|
|
•
|
The wide angle camera lens can be damaged by objects such as stones flying from outside while
driving.
|
|
Diagnostic with KDS
| 1. |
The wide angle camera can be more quickly diagnosed for problems with the KDS. (Refer to "DTC
guide")
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
|
| (2)
|
S/W Management : Controlling other features including system option setting and zero point
adjustment.
(S/W Management → Advanced Driver Assistance System_Parking → System Identification)
(S/W Management → Advanced Driver Assistance System Parking → SVM Calibration Mode)
(S/W Management → Advanced Driver Assistance System Parking → SVM - Calibration Mode)
(S/W Management → Advanced Driver Assistance System Parking → SVM Self-calibration mode)
|
|
Refer to the KDS screen for operating conditions and details.
|
|
Wide Angle Camera Removal and Installation
|
In the case of poor image quality or poor focus, first check the surface condition of the wide-angle camera
lens and contamination by foreign substances.
|
Wide Angle Front Camera
| 1. |
Perform the order below with the KDS before replacing the wide angle camera.
(S/W Management → Advanced Driver Assistance System_Parking → System Identification)
|
Refer to the KDS screen for operating conditions and details.
|
|
| 2. |
Remove the front center lamp assembly.
(Refer to Body - "Front Center Lamp")
|
| 3. |
Remove the camera (A) after removing the screws.
|
Wide Angle Side Camera
| 1. |
Remove the outside mirror housing cover.
(Refer to Body - "Outside Mirror")
|
| 2. |
Remove the camera (A).
|
| 3. |
Disconnect the camera connector (A).
|
Wide Angle Rear Camera
| 1. |
Remove the tailgate outside handle switch assembly.
(Refer to Body - "Tailgate Switch")
|
| 2. |
Remove the rear view camera.
| (1)
|
Disconnect the power tailgate outside handle switch connector (B).
|
| (2)
|
Remove the camera (A) after removing the screws.
|
|
Clip position :
|
|
| 1. |
Install in the reverse order of removal.
|
| 2. |
Perform the wide angle camera tolerance calibration.
(Refer to Wide Angle Camera - "Adjustment")
|
•
|
If there is any abnormality after replacing the wide angle camera, replace the ADAS parking
ECU and check the normal operation.
|
|
•
|
If the fault persists after replacing the ADAS parking ECU, do not replace the ADAS parking
ECU.
|
|
|
Driver Parking Assistance Switch Removal and Installation
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and
high voltage shut-off procedure.
|
|
| 1. |
Remove the console switch.
(Refer to Body - "Floor Console Upper Cover")
|
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and
high voltage shut-off procedure.
|
|
| 1. |
Install in the reverse order of removal.
|
ADAS Parking ECU (ADAS_PRK) Specification. ADAS Parking ECU (ADAS_PRK) On Vehicle Inspection
ADAS Parking ECU (ADAS_PRK) Specification
Item
|
Specification
|
Rated voltage (V)
|
12.0
|
Operation voltage (V)
|
9.0 - 16.0
|
Quantity
|
1
|
ADAS Parking ECU (ADAS_PRK) On Vehicle Inspection
Diagnostic with KDS
| 1. |
The ADAS parking ECU can be more quickly diagnosed for problems with the KDS. (Refer to "DTC
guide")
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
|
| (2)
|
S/W Management : Controlling other features including system option setting and zero point
adjustment.
(S/W Management → Advanced Driver Assistance System_Parking → System Identification)
(S/W Management → Advanced Driver Assistance Systems_Parking → Variant Coding)
|
|
Refer to the KDS screen for operating conditions and details.
|
|
ADAS Parking ECU (ADAS_PRK) Removal and Installation
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE)
and high voltage shut-off procedure.
|
|
ADAS Parking ECU (ADAS_PRK)
| 1. |
Remove the cluster unit.
(Refer to Body - "Cluster Unit")
|
| 2. |
Separate the ADAS_PRK (A) after removing the bolts.
Tightening torque :
3.6 - 4.0 N·m (0.37 - 0.41 kgf·m, 2.7 - 3.0 lb·ft, 32.1 - 35.6 lb·in)
|
|
| 3. |
Remove the ADAS_PRK (A) after disconnecting the connector (B).
|
ADAS Parking ECU (ADAS_PRK) Bracket
| 1. |
Remove the ADAS parking ECU.
|
| 2. |
Remove the bracket (A) by removing the nuts.
Tightening torque :
3.6 - 4.0 N·m (0.37 - 0.41 kgf·m, 2.7 - 3.0 lb·ft, 32.1 - 35.6 lb·in)
|
|
Cooling Fan
| 1. |
Remove the ADAS parking ECU.
|
| 2. |
Separate the cooling fan (A) after removing the screws.
|
| 3. |
Remove the cooling fan (A) after disconnecting the connector (B).
|
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE)
and high voltage shut-off procedure.
|
|
| 1. |
Install in the reverse order of removal.
|
Ultrasonic Sensor Specification. Ultrasonic Sensor Description and Operation
Ultrasonic Sensor Specification
Item
|
Specification
|
Rated voltage (V)
|
12.0
|
Operation voltage (V)
|
9.0 - 16.0
|
Quantity
|
PDW-F/R, PCA-R
|
8
|
PDW-F/R/S, PCA-F/S/R, RSPA 2
|
12
|
Ultrasonic Sensor Description and Operation
| Description and Operation |
Item
|
Name
|
Function
|
Parking Safety
|
Parking Distance Warning-Forward/Reverse PDW-F/R (Parking Distance Warning-Forward/Revers)
|
Detects the front/rear objects and chimes the warning while going forward/reverse.
|
Parking Distance Warning-Forward/Side/Reverse PDW-F/R/S (Parking Distance
Warning-Forward/Side/Reverse)
|
Detects the front/side/rear objects and chimes the warning while going forward/reverse.
|
Parking Collision-Avoidance Assist-Reverse PCA-R (Parking Collision-Avoidance Assist-Reverse)
|
Detects pedestrians and objects around the vehicle when driving backward and assists in collision avoidance with
warning or braking.
|
Parking Collision-Avoidance Assist-Forward/Side/Reverse PCA-F/S/R (Parking Collision-Avoidance
Assist-Forward/Side/Reverse)
|
Detects the front/lateral/rear objects, chimes the warning and engages the brake to avoid collision while going
forward/reverse.
|
Parking Convenience
|
Remote Smart Parking Assist (RSPA)
|
Remote smart parking/exit assistance using the smart key, and parking space detection.
|
Ultrasonic Sensor On Vehicle Inspection
Visual inspection
If there is a problem with PDW, PCA or RSPA check the items below.
| 1. |
Checking bumper cleanliness
|
•
|
If snow or water droplets freeze on the ultrasonic sensor surface, the performance may deteriorate.
|
|
•
|
If there are foreign substances such as mud on the surface of the ultrasonic sensor, the
performance may deteriorate.
|
|
| 2. |
Check the condition around the bumper
|
•
|
If an object generating ultrasonic waves is nearby, the performance may deteriorate.
|
|
•
|
If decorations are attached around the ultrasonic sensor, the performance may deteriorate.
|
|
| 3. |
Checking bumper geometry or mounting status
|
•
|
If the ultrasonic sensor and the peripheral part are arbitrarily separated, the performance may
deteriorate.
|
|
•
|
If an impact is applied to the surface of the ultrasonic sensor or if it is damaged by scratches,
the performance may deteriorate.
|
|
•
|
If the installation state of the ultrasonic sensor is different from that at the time of shipment
of the vehicle, the performance may deteriorate.
|
|
•
|
If decorations are attached around the ultrasonic sensor, the performance may deteriorate.
|
|
| 4. |
Check the ultrasonic sensor installation status when a trouble code occurs
|
| 5. |
Check the button operation
|
•
|
For PDW specification, press the parking safety button (A) briefly (less than 1 second) to confirm
PDW On/Off.
|
|
•
|
For PCA specification, press the parking safety button (A) briefly (more than 1 second) to confirm
PCA On/Off.
|
|
Diagnostic with KDS
| 1. |
The ultrasonic sensor can be more quickly diagnosed for problems with the KDS. (Refer to "DTC
guide")
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
|
|
Refer to the KDS screen for operating conditions and details.
|
|
Ultrasonic Sensor Removal and Installation
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and
high voltage shut-off procedure.
|
|
|
For failures such as PDW false warnings or non-warning, first check the surface condition of the ultrasonic
sensor and contamination by foreign substances.
|
Ultrasonic Sensor [Front]
| 1. |
Remove the front bumper assembly.
(Refer to Body - "Front Bumper Assembly")
|
| 2. |
Disconnect the ultrasonic sensor connector (A).
|
| 3. |
Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow.
|
Ultrasonic Sensor [Rear]
| 1. |
Remove the rear bumper assembly.
(Refer to Body - "Rear Bumper Assembly")
|
| 2. |
Disconnect the ultrasonic sensor connector (A).
|
| 3. |
Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow.
|
Front / Rear Corner Ultrasonic Sensor
| 1. |
Remove the front bumper assembly.
(Refer to Body - "Front Bumper Assembly")
|
| 2. |
Remove the rear bumper assembly.
(Refer to Body - "Rear Bumper Assembly")
|
| 3. |
Disconnect the ultrasonic sensor connector (A).
[Front]
[Rear]
|
| 4. |
Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow.
[Front]
[Rear]
|
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and
high voltage shut-off procedure.
|
|
| 1. |
Install in the reverse order of removal.
|
Other information:
Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: A Guide to Storage, Transport and Disposal of Old Battery Systems
Used high voltage battery system storage, transportation, disposal
guide
•
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training.
Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Electric vehicle overview
The Kia EV6 is powered by an advanced high-voltage battery system and electric drive motor rather than a
traditional
internal combustion engine. Unlike gasoline-powered vehicles, electric vehicles use electrical energy stored
within
the high-voltage battery pack to propel the vehicle efficiently and quietly.
Because the Kia EV6 operates entirely on electric power, it does not require gasoline and produces no tailpipe
emissions during driving, helping reduce environmental impact while delivering smooth acceleration and
responsive
performance.

Contents
Categories