Kia EV6: Heating,Ventilation And Air Conditioning / Controller

Contents:

Auto Temperature Control Unit Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage service interlock connector.
(1)
Open the front trunk (A).

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

(2)
Open the auxiliary 12 V battery service cover (A).

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

(3)
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal (A).

Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft)

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

(4)
Disconnect the service interlock connector (A).

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

Warning
•
Wait more than 5 minutes for capacitor of the high voltage battery system to be discharged completely.
•
When working on a vehicle during discharging the capacitor, it can cause an electrical shock or injury, so follow the manual.
Note
The service interlock connector cannot be completely removed.

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

2.
Open the glove box (A).

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

3.
Remove the screws (A).

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

4.
Remove the auto temperature control unit (A) after disconnecting the connectors (B).

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Heater and Air Conditioning Controller On Vehicle Inspection

On Vehicle Inspection
Diagnostic with KDS
1.
The heater and A/C controller can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
(1)
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)

Heater and Air Conditioning Controller Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Remove the infotainment keyboard.
(Refer to Body - "Infotainment Keyboard")
Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Other information:

Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: EV menu

Selecting the EV menu from the Kia EV6 infotainment home screen allows access to various electric vehicle management features, charging settings, energy monitoring functions, and battery-related information. TIP The Kia EV6 infotainment interface may change after software or navigation updates.

Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: A/C system operation tips

If your Kia EV6 has been parked under direct sunlight during extremely hot weather, slightly open the windows for a short period before driving to release trapped hot air from the cabin more quickly. During rainy or humid weather conditions, operating the Kia EV6 air conditioning system helps reduce moisture buildup inside the cabin and minimizes windshield fogging.

Contents

Categories

 
Copyright © 2026 Kia EV6 Manuals � 0.0142