Contents:
| Component |
| 1. Hood Assembly 1-a. 18.6 - 24.5 N·m (1.9 - 2.5 kgf·m, 13.7 - 18.1 lb·ft) 2. Hood Insulator Pad 3. Hood Lifter 4. Hood Hinge 5. Hood Latch Release Handle |
6. Hood Latch Release Handle Base 7. Front Bumper Assembly 8. Hood Latch Cable 1 9. Hood Latch Cable 2 10. Hood Latch Assembly 10-a. 6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft) |
| Adjustment |
| 1. |
Loosening the bolts of the hood hinge (A).
|
| 2. |
Tighten the bolts after adjusting the hood by moving it in all directions.
|
| 3. |
Adjust the height of the hood by turning the overslam bumper (B) in clockwise and counterclockwise.
|
| 4. |
Loosen the hood latch (C) bolts, adjust the hood latch by moving it up, down, left and right, and then
tighten the bolts.
|
| 5. |
When the hood is closed after the completion of adjustment, check if there is an iron noise when the front
hood latch area of the hood assembly outer plate is tapped. If there is iron noise, increase the overlap by
adjusting the two hood overslam bumpers down one quarter to a half of a turn.
|
| Removal |
|
| 1. |
Remove the lifter (B) after releasing the clips (A).
|
| 2. |
Remove the hood assembly (A) after removing the bolts.
|
| Installation |
|
| 1. |
Install in the reverse order of removal.
|
| Removal |
|
| 1. |
Remove the hood insulator pad (A) after removing the fasteners.
|
| Installation |
|
| 1. |
Install in the reverse order of removal.
|
| Removal |
|
| 1. |
Remove the radiator upper cover.
(Refer to Front & Rear Bumper - "Front Bumper
Assembly")
|
| 2. |
Disconnect the hood latch connector (A).
|
| 3. |
Remove the hood latch assembly (A) after removing the bolts.
|
| 4. |
Separate the hood latch cable (A).
|
| Installation |
|
| 1. |
Install in the reverse order of removal.
|
| Removal |
|
| 1. |
Remove the hood latch release handle (A) after retracting the fixing hook in the direction of the arrow.
|
| Installation |
|
| 1. |
Install in the reverse order of removal.
|
| Removal |
|
| 1. |
Remove the lifter (B) after releasing the clips (A).
|
| Installation |
|
| 1. |
Install in the reverse order of removal.
|
Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Head-Up Display (HUD) : (if equipped)
The Kia EV6 Head-Up Display (HUD) is an advanced transparent projection system that displays important driving information directly onto the windshield within the driver’s field of vision. This technology allows the Kia EV6 driver to monitor critical driving information without taking attention away from the road ahead. The HUD system can display information from the instrument cluster, navigation system, and various driver assistance technologies in real time.