| Removal |
|
|
|
| 1. |
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage
service interlock connector.
|
| 2. |
Remove the multi sensor cover.
(Refer to Roof Trim - "Multi Sensor Cover")
|
| 3. |
Disconnect the rain sensor connector (A).
|
| 4. |
Separate the rain sensor clip (A) by pulling it in the direction of the arrow.
Silicone Pad Reuse Criteria After Rain Sensor Removal and Installation Precautions (Play ▶)
Notes When Refering Video
This video provides guidance for understanding complex or hard-to-follow procedures by showing each step
clearly.
As needed, the video also provides clear guidance on essential procedural steps, including adjustment and
diagnostic processes, the use of SSTs, and precautions to avoid component damage.
|
| 5. |
Remove the rain sensor (A).
|
| Installation |
|
| 1. |
Install in the reverse order of removal.
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Charging and climate
Tap the corresponding icon on the Kia EV6 infotainment screen to access Scheduled Charging and Target Temperature settings. NOTE To use scheduled charging features, the Kia EV6 must remain connected to a charging cable at the scheduled charging time. You can configure charging schedules, charging dates, charging times, and target cabin climate temperatures.Used high voltage battery system storage, transportation, disposal guide • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training.