Kia EV6: Body (Interior / Exterior / Electrical) / Exterior Green House

Contents:

Cowl Top Cover Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Remove the front trunk.
(Refer to Body Side Molding - "Front Trunk")
2.
Remove the front wiper arm.
(Refer to Exterior Green House - "Wiper Arm")
3.
Separate the washer nozzle (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Cowl Top Cover / Removal and Installation / Removal illustration

4.
Remove the cowl top cover (A) after removing the fasteners.

Body (Interior / Exterior / Electrical) — Exterior Green House / Cowl Top Cover / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Rain Sensor Removal and Installation ➤

Tailgate Glass Removal

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Remove the tailgate trim.
(Refer to Tailgate - "Tailgate Trim")
2.
Remove the rear spoiler.
(Refer to Body Side Molding - "Rear Spoiler")
3.
Remove the tailgate garnish.
(Refer to Body Side Molding - "Tailgate Garnish")
4.
Disconnect the heated wire connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Removal illustration

5.
Insert the piano wire (A) in the corner side.

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Removal illustration

6.
Cut off the sealant of forward edge side (B) in pulling a piano wire (A) left and right.

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Removal illustration

Caution
•
Be careful not to burn hands as the excessive heat may be generated while using the wire.
•
Be careful as the wire may break when working.
7.
Remove the tailgate glass (A) carefully using a glass holder (B).

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Removal illustration

Tailgate Glass Installation

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Clean the edges of the body panel and the tailgate glass with alcohol, etc.
2.
Apply a body primer to the edge of the body panel.

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Installation illustration

Note
•
Be careful not to touch the primed surface with your hands, as water leakage may occur after the tailgate glass is installed.
•
Do not apply the glass primer to the body.
•
Do not smear the primer-covered surface to any foreign materials.
3.
Apply the glass primer to the edge of tailgate glass.

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Installation illustration

Note
•
Be careful not to touch the primed surface with your hands, as water leakage may occur after the tailgate glass is installed.
•
Do not smear the primer-covered surface to any foreign materials.
4.
Apply the sealant (B) around the tailgate glass (A) by using a sealant gun.

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Installation illustration

5.
Using the glass holder, adjust the tailgate glass (A) to stopper hole (B) on the body and carefully tap the tailgate glass to make the edges fully seated on the bonding surface of body.

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Installation illustration

6.
Connect the tailgate heated wire connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Tailgate Glass / Installation illustration

7.
Perform a water leak test at least 3 to 4 hours later after installing the tailgate glass.
Note
Keep the water stream away from directly touching the newly installed adhesive surface and let the water fall on the side of the glass.
8.
If a leak occurs, apply the sealant to the area where the leak occurs.
Note
•
Leave the car on a flat surface for at least 4 hours after installing the tailgate glass. If driving the car is inevitable, drive at a low speed in least 8 hours.
•
The driver should be careful to drive the vehicle aggressively or avoid uneven road driving for 2-3 days.
9.
Install in the reverse order of removal.

Windshield Glass Removal

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Remove the front pillar trim.
(Refer to Interior Trim - "Front Pillar Trim")
2.
Remove the inside mirror assembly.
(Refer to Mirror - "Inside Mirror")
3.
Remove the auto defogging sensor.
(Refer to Heater and Air Conditioning Unit - "Auto Defogging Sensor")
4.
Remove the rain sensor.
(Refer to Exterior Green House - "Rain Sensor")
5.
Remove the hi-pass antenna.
(Refer to Infotainment system - "Antenna")
6.
Remove the front view camera unit.
(Refer to Advanced Driver Assistance Systems (ADAS) - "Front Camera")
7.
Remove the cowl top cover.
(Refer to Exterior Green House - "Cowl Top Cover")
8.
Remove the A pillar garnish.
(Refer to Body Side Molding - "A Pillar Garnish")
9.
Insert the piano wire (A) in the corner side.

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Removal illustration

10.
While pulling the piano wire (A) in the direction of the arrow, cut out the sealant on the front edge side (B).

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Removal illustration

Caution
•
Be careful not to burn hands as the excessive heat may be generated while using the wire.
•
Be careful as the wire may break when working.
11.
Cut off the sealant on (A-A), (B-B) area, while pulling the piano wire to the left and right.

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Removal illustration

12.
Cut the sealant in section (A-A) using a cutter knife.

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Removal illustration

Note
Cut the sealant carefully as it may damage the crash pad when working the area (A-A). Be careful not to damage the body painting surface.
Information
When using a cutter knife, use the blade of a knife with a 20 to 30 cm-long.
13.
Remove the windshield glass (A) carefully by using a glass holder (B).

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Removal illustration

Windshield Glass Installation

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Note
When replacing with the windshield glass of the front camera type, be sure to replace with the type equipped with the coupler. If the coupler is attached to the windshield glass type that is not equipped with the coupler, the front camera may not work properly.
1.
Cut off the sealant around the body panel by using a cutter knife, leaving a thickness of 2 mm from the adhesive side. When a new windshield is used, put the matching marks on the glass and the body.
Note
•
Be careful not to damage the body surface.
•
If the body painting surface is damaged, apply the repair paint or anti-corrosion agent.
2.
Clean the edges of the body panel and the windshield glass with alcohol, etc.
3.
Apply a body primer to the edge of the body panel.

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Installation illustration

Note
•
Do not touch the primed surface with your hands, as water leakage may occur after the windshield glass is installed.
•
Do not apply the glass primer to the body.
•
Do not smear the primer-covered surface to any foreign materials.
4.
Apply the glass primer to the edge of windshield glass.

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Installation illustration

Note
•
Do not touch the primed surface with your hands, as water leakage may occur after the windshield glass is installed.
•
Do not apply the glass primer to the body.
•
Do not smear the primer-covered surface to any foreign materials.
•
Apply the sealant within 5 minutes after applying the primer.
5.
Apply the sealant (B) around the windshield glass (A).

Sealant bead width
Height : 12 mm (0.47 in.)
Width : 8 mm (0.31 in.)

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Installation illustration

6.
Adjust the windshield glass (A) to stopper hole (B) of the body by using glass holder and carefully tap the windshield glass and press it against the body flange surface.

Body (Interior / Exterior / Electrical) — Exterior Green House / Windshield Glass / Installation illustration

7.
Test for water leakage.
Note
Keep the water stream away from directly touching the newly installed adhesive surface and let the water fall on the side of the glass.
8.
If water leak occurs, apply sealant to the leaked area.
Note
•
Leave the car on a flat surface for at least 4 hours after installing the windshield glass.
•
If the vehicle needs to be used, drive slowly at least for 8 hours.
•
The driver should be careful to drive the vehicle aggressively or avoid uneven road driving for 2-3 days.
9.
Install in the reverse order of removal.

Wiper Arm Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Front Wiper Arm
1.
Remove the wiper arms (A) by removing the nuts after removing the caps.

Tightening torque :
22.6 - 26.5 N·m (2.3 - 2.7 kgf·m, 16.6 - 19.5 lb·ft)

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Arm / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.
Note
When installing, place the wiper arm to the specified position and then tighten the nut.
[Front Wiper]
(Passenger)
–
Place the wipers to the marking (A) position of cowl top cover.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Arm / Removal and Installation / Installation illustration

(Driver Side)
–
Place the wipers to the marking (A) position of windshield glass.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Arm / Removal and Installation / Installation illustration

Wiper Motor Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Front Wiper Motor
1.
Remove the cowl top cover.
(Refer to Exterior Green House - "Cowl Top Cover")
2.
Disconnect the wiper motor connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Motor / Removal and Installation / Removal illustration

3.
Remove the wiper motor (A) after removing the bolts.

Tightening torque :
6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft)

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Motor / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Wiper Washer Motor Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Washer Motor
1.
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage service interlock connector.
(1)
Open the front trunk (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(2)
Open the auxiliary 12 V battery service cover (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(3)
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal (A).

Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft)

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(4)
Disconnect the service interlock connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

Warning
•
Wait more than 5 minutes for capacitor of the high voltage battery system to be discharged completely.
•
When working on a vehicle during discharging the capacitor, it can cause an electrical shock or injury, so follow the manual.
Note
The service interlock connector cannot be completely removed.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

2.
Remove the motor connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

3.
Remove the motor (A) in the direction of the arrow after disconnecting the washer nozzle hose (B).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

Note
Washer fluid is drained when removing washer motor.
Washer Fluid Level Sensor
1.
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage service interlock connector.
(1)
Open the front trunk (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(2)
Open the auxiliary 12 V battery service cover (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(3)
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal (A).

Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft)

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(4)
Disconnect the service interlock connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

Warning
•
Wait more than 5 minutes for capacitor of the high voltage battery system to be discharged completely.
•
When working on a vehicle during discharging the capacitor, it can cause an electrical shock or injury, so follow the manual.
Note
The service interlock connector cannot be completely removed.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

2.
Disconnect the washer fluid level sensor connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

3.
Remove the washer level sensor (A) in the direction of the arrow.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

Reservoir tank
1.
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage service interlock connector.
(1)
Open the front trunk (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(2)
Open the auxiliary 12 V battery service cover (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(3)
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal (A).

Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft)

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

(4)
Disconnect the service interlock connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

Warning
•
Wait more than 5 minutes for capacitor of the high voltage battery system to be discharged completely.
•
When working on a vehicle during discharging the capacitor, it can cause an electrical shock or injury, so follow the manual.
Note
The service interlock connector cannot be completely removed.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

2.
Separate the washer nozzle hoses (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

3.
Disconnect the washer lever sensor connector (A) and washer motor connector (B).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

4.
Remove the reservoir tank assembly (A) after removing the bolts and nut.

Tightening torque :
6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft)

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Wiper Washer Motor Inspection

Inspection
Washer Motor
1.
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage service interlock connector.
(1)
Open the front trunk (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Inspection illustration

(2)
Open the auxiliary 12 V battery service cover (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Inspection illustration

(3)
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal (A).

Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft)

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Inspection illustration

(4)
Disconnect the service interlock connector (A).

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Inspection illustration

Warning
•
Wait more than 5 minutes for capacitor of the high voltage battery system to be discharged completely.
•
When working on a vehicle during discharging the capacitor, it can cause an electrical shock or injury, so follow the manual.
Note
The service interlock connector cannot be completely removed.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Inspection illustration

2.
Before filling the reservoir tank with water, check the filter for foreign material or contamination.
if necessary, clean the filter.
Note
Using low-grade washer fluid may clog the washer pump and cause the malfunction of the pump motor.
3.
Fill the washer fluid after installing the washer motor in the reservoir tank.
4.
Connect positive ( + ) battery cables to terminal 2 and negative ( - ) battery cables to terminal 1 respectively.
5.
Check that the motor operates normally and the washer motor runs and water sprays from the front nozzles.
6.
If they are abnormal, replace the washer motor.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Inspection illustration

Terminal
Function
1
Washer ( + )
2
Ground

Washer Fluid Level Sensor
1.
Drain the washer fluid below the washer level sensor position.
2.
Disconnect the sensor switch connector (2 pins) and check the current state between the terminals.

Body (Interior / Exterior / Electrical) — Exterior Green House / Wiper Washer Motor / Inspection illustration

Terminal
Function
1
Level sensor ( + )
2
Ground

Other information:

Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Power liftgate: (if equipped)

Power liftgate operating conditions The Kia EV6 power liftgate system operates when the vehicle is in P (Park) while running. When the vehicle is turned off, the power liftgate can still operate regardless of gear position. For safety reasons, the liftgate only opens when vehicle speed remains below 1.8 mph (3 km/h). Before using the Kia EV6 power liftgate, always confirm that the vehicle is securely shifted into P (Park).

Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Consumer Assistance (U.S. only)

Roadside Assistance coverage is provided for all new Kia EV6 vehicles and other eligible current model-year Kia vehicles beginning on the date of delivery to the original retail owner or the date the vehicle is first placed into service, whichever occurs first. Coverage remains in effect for up to 60 months or 60,000 miles, whichever comes first, and is subject to the specific terms, limitations, exclusions, and conditions outlined in the Kia Warranty and Consumer Information Manual applicable to your Kia EV6 model year.

Contents

Categories

 
Copyright © 2026 Kia EV6 Manuals ⏱ 0.0211