Kia EV6: Restraint / Seat Belt System
Contents:
Description and Operation. On Vehicle Inspection
Description and Operation
| 1. |
Seat Belt Pretensioner (BPT)
|
•
|
When a collision occurs, the seat belt pretensioner winds the seat belt and prevents the
driver's and front passenger's body from being leaned forward and collided with the interior
parts of the vehicle.
|
|
•
|
The seat belt pretensioner operates with airbags.
|
|
The seat belt pretensioner generates heat when activated, so do not touch it for several minutes
after activation.
|
|
| 2. |
Seat Belt Reminder
|
•
|
This is a function that informs the driver whether or not a passenger is wearing a seat belt while
stopping or driving.
|
|
•
|
When POWER ON regardless of whether the seat belt is fastened, the seat belt warning light turns on
for 3 - 6 seconds and then turns off.
|
|
On Vehicle Inspection
Diagnosis with KDS
| 1. |
The seat belt system can be more quickly diagnosed for problems with the KDS (Refer to "DTC
guide").
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found)
|
|
Height Adjust Removal and Installation
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE)
and high voltage shut-off procedure.
|
|
| 1. |
Remove the center pillar upper trim.
(Refer to Body - "Center Pillar Trim")
|
| 2. |
Separate the seat belt (A) after removing the bolt.
Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)
|

|
| 3. |
Remove the height adjust (A) after removing the bolts.
Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)
|

|
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE)
and high voltage shut-off procedure.
|
|
| 1. |
Install in the reverse order of removal.
|
Seat Belt Pretensioner (BPT) Troubleshooting
|
Direct measuring the resistance of the seat belt pretensioner is very dangerous as it can cause the seat
belt pretensioner to deploy.
|

Seat Belt Pretensioner (BPT) Removal and Installation
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE)
and high voltage shut-off procedure.
|
|
|
Use KDS to proceed with fault diagnosis and check that the seat belt operates normally, after a collision.
Replace it with a new one if necessary.
|
Front Seat Belt Pretensioner (BPT)
| 1. |
Remove the center pillar lower trim.
(Refer to Body - "Center Pillar Trim")
|
| 2. |
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage
service interlock connector.
| (1)
|
Open the front trunk (A).
|
| (2)
|
Open the auxiliary 12 V battery service cover (A).
|
| (3)
|
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal (A).
Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft)
|
|
| (4)
|
Disconnect the service interlock connector (A).
|
•
|
Wait more than 5 minutes for capacitor of the high voltage battery system to be
discharged completely.
|
|
•
|
When working on a vehicle during discharging the capacitor, it can cause an
electrical shock or injury, so follow the manual.
|
|
|
The service interlock connector cannot be completely removed.
|
|
|
| 3. |
Disconnect the BPT connector (A).
|
| 4. |
Remove the BPT (A) after removing the bolt.
Tightening torque :
44.1 - 54.9 N·m (4.5 - 5.6 kgf·m, 32.5 - 40.5 lb·ft)
|
|
Rear Seat Belt Pretensioner (BPT)
| 1. |
Remove the rear pillar trim.
(Refer to Body - "Rear Pillar Trim")
|
| 2. |
Remove the BPT (B) after disconnecting the connector (A) and removing the bolt.
Tightening torque :
44.1 - 54.9 N·m (4.5 - 5.6 kgf·m, 32.5 - 40.5 lb·ft)
|
|
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE)
and high voltage shut-off procedure.
|
|
| 1. |
Install in the reverse order of removal.
|
Be sure to keep the torque specifications presented in shop manuals. Otherwise, it could lead to
the malfunction of airbag system.
|
|
| 2. |
Check that the airbag system operates normally.
|
When POWER ON, the airbag warning light should turns off after turning on for 3 - 6 seconds.
|
|
Seat Belt Reminder Removal and Installation
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and
high voltage shut-off procedure.
|
|
|
The indication below represents the location of a clip or fastener.
|
Front Seat Belt Buckle
| 1. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
|
| 2. |
Separate the connector wiring after removing the fasteners (A).
|
| 3. |
Remove the buckle (A) after removing the bolt.
Tightening torque :
44.1 - 53.9 N·m (4.5 - 5.5 kgf·m, 32.5 - 39.8 lb·ft)
|
|
Rear Seat Belt Buckle [Driver's Side]
| 1. |
Remove the rear seat back assembly. [Driver's side]
(Refer to Body - "Rear Seat Assembly")
|
| 2. |
Separate the connector wiring (A) after removing the fasteners.
|
| 3. |
Remove the buckle (A) after removing the bolt.
Tightening torque :
44.1 - 53.9 N·m (4.5 - 5.5 kgf·m, 32.5 - 39.8 lb·ft)
|
|
Rear Seat Belt Buckle [Passenger's Side]
| 1. |
Remove the rear seat back assembly. [Passenger's side]
(Refer to Body - "Rear Seat Assembly")
|
| 2. |
Separate the connector wiring (A) after removing the fasteners.
|
| 3. |
Remove the buckle (A) after removing the bolt and nut.
Tightening torque :
44.1 - 53.9 N·m (4.5 - 5.5 kgf·m, 32.5 - 39.8 lb·ft)
|
|
|
•
|
When working on the high voltage system, the work should be performed by technicians who have
completed the relevant training. A lack of understanding of the high voltage system can lead to
serious accidents due to electric shock or short circuit.
|
|
•
|
When working on the high voltage system or related components, be sure to observe and be aware of
the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due
to electric shock or short circuit.
|
|
•
|
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and
high voltage shut-off procedure.
|
|
| 1. |
Install in the reverse order of removal.
|
| 2. |
Check that the airbag system operates normally.
|
When POWER ON, the airbag warning light should turns off after turning on for 3 - 6 seconds.
|
|
Other information:
Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Highway Lane Change Assist: (if equipped)
Display and control
You can check the operating status of the Highway Lane Change Assist function in the Driving Assist view on the
Kia
EV6 instrument cluster. For more information about the related graphics and indicators, refer to the LCD display
section.
The Highway Lane Change Assist status is displayed on the Kia EV6 cluster as follows:
Figure 1.
Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Refrigerant Recovery/Recycling/Charging/Vacuum/Leak Test
Refrigerant Recovery/Recycling/Charging/Vacuum/Leak Test (R-134a)
Install the refrigerant recovery/recycling/charging equipment
1.
Connect the refrigerant recovery/recycling/charging equipment to the high-pressure service port (A) and
low-pressure service port (B).
Refrigerant charging equipment should be installed on a flat surface so that it is easy to recover
the refrigerant and in particular, the refrigerant can be accurately injected.

Contents
Categories