Kia EV6: Body (Interior / Exterior / Electrical) / Rear Seat

Contents:

Rear Seat Assembly Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Rear Seat Cushion Assembly
1.
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal, and disconnect the high voltage service interlock connector.
(1)
Open the front trunk (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

(2)
Open the auxiliary 12 V battery service cover (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

(3)
Turn the POWER OFF, separate the auxiliary battery (12 V) ( - ) terminal (A).

Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 kgf·m, 5.8 - 7.2 lb·ft)

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

(4)
Disconnect the service interlock connector (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

Warning
•
Wait more than 5 minutes for capacitor of the high voltage battery system to be discharged completely.
•
When working on a vehicle during discharging the capacitor, it can cause an electrical shock or injury, so follow the manual.
Note
The service interlock connector cannot be completely removed.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

2.
Remove the rear seat cushion assembly (A) after pulling the front part (B) of the cushion and pull upwards.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

3.
Disconnect the cushion assembly connector (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

4.
Disconnect the cushion assembly main connector (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

Rear Seat Back Assembly [Driver's Side]
1.
Remove the rear seat cushion assembly.
2.
Separate the folding lever cable (B) after opening the cap (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

3.
Remove the seat back assembly (A) after removing the bolts.

Tightening torque :
16.7 - 25.5 N·m (1.7 - 2.6 kgf·m, 12.3 - 18.8 lb·ft)

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

4.
Disconnect the rear seat connector (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

Rear Seat Back Assembly [Passenger's Side]
1.
Remove the rear seat cushion assembly.
2.
Separate the folding lever cable (B) after opening the cap (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

3.
Remove the seat back assembly (A) after removing the bolts.

Tightening torque : 16.7 - 25.5 N·m (1.7 - 2.6 kgf·m, 12.3 - 18.8 lb·ft)

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

4.
Disconnect the connectors (A, B).
A: Seat belt assembly connector
B: Seat belt reminder connector

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Assembly / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Rear Seat Back Cover Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Driver's Side
1.
Remove the rear seat back cover assembly.
(Refer to Rear Seat - "Rear Seat Back Cover Assembly")
2.
Remove the velcro tape (A) and the hog ring clips (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover / Removal and Installation / Removal illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover / Removal and Installation / Removal illustration

3.
Separate the rear seat back cover (A) and the rear seat back pad (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover / Removal and Installation / Removal illustration

Passenger's Side
1.
Remove the rear seat back cover assembly.
(Refer to Rear Seat - "Rear Seat Back Cover Assembly")
2.
Remove the hog ring clips (A) and velcro tapes (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover / Removal and Installation / Removal illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover / Removal and Installation / Removal illustration

3.
Separate the rear seat back cover (A) and the rear seat back pad (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Rear Seat Back Cover Assembly Removal and Installation

Replacement
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Driver's Side
1.
Remove the rear seat outer shield cover.
(Refer to Rear Seat - "Rear Seat Shield Cover")
2.
Remove the headrest (A) by pulling it in the direction of the arrow.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

3.
Remove the headrest guides (A) by pulling it in the direction of the arrow.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

4.
Separate the seat back protector (A) after removing the clip.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

5.
Remove the seat back lower armrest (A) after removing the screws.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

6.
Remove the armrest (A) after removing the bolt.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

7.
Remove the armrest board garnish (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

8.
Remove the armrest board (A) after removing the screws.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Information
Clip position :

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

9.
Remove the center seat belt (A) after removing the bolt.

Tightening torque :
44.1 - 53.9 N·m (4.5 - 5.5 kgf·m, 32.5 - 39.8 lb·ft)

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

10.
Remove the tether garnish (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

11.
Remove the seat back cover protector (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

12.
Open the seat back cover zipper (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

13.
Remove the rear seat back board (A) after removing the hog ring clips (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

14.
Remove the rear seat heating harness (A, B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Information
Clip position :

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

15.
Remove the rear seat back assembly (A) from the rear seat back frame (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Passenger's Side
1.
Remove the rear seat outer shield cover and inner shield cover.
(Refer to Rear Seat - "Rear Seat Shield Cover")
2.
Remove the headrest (A) by pulling it in the direction of the arrow.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

3.
Remove the headrest guides (A) by pulling it in the direction of the arrow.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

4.
Remove the tether garnish (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

5.
Open the seat back cover zipper (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

6.
Remove the seat back cover protectors (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

7.
Remove the seat back cover (A) in the direction of the arrow after opening the zipper.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

8.
Remove the seat back board (A) after removing the hog ring clips (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

9.
Disconnect the heated wire connector (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

10.
Remove the rear seat heating harness (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Information
Clip position :

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

11.
Remove the rear seat back assembly (A) from the rear seat back frame (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Back Cover Assembly / Removal and Installation / Replacement illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Rear Seat Cushion Cover Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the rear seat cushion cover hog ring clips (A) and velcro tape (B).
[Rear]

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Cushion Cover / Removal and Installation / Removal illustration

[Front]

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Cushion Cover / Removal and Installation / Removal illustration

3.
Separate the rear seat cushion cover (A) and the rear seat cushion pad (B).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Cushion Cover / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Rear Seat Shield Cover Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Outer Shield Cover [Driver' Side]
1.
Remove the rear seat assembly [Driver's side].
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the recliner lever (A) after removing the screw.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

3.
Remove the cover (A) after removing the screws.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

Outer Shield Cover [Passenger's Side]
1.
Remove the rear seat assembly [Passenger's side].
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the recliner lever (A) after removing the screw.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

3.
Remove the cover (A) after removing the screws.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

Inner Shield Cover [Passenger's Side]
1.
Remove the rear seat assembly [Passenger's side].
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the cover (A) after removing the screw.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

Information
Clip position :

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Shield Cover / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Rear Seat Switch Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Rear Seat Folding Switch
1.
Remove the luggage side trim.
(Refer to Luggage Trim - "Luggage Side Trim")
2.
Remove the switch (A) after removing the screws.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Switch / Removal and Installation / Removal illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Switch / Removal and Installation / Removal illustration

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Switch / Removal and Installation / Removal illustration

Information
Clip position :

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Switch / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.

Rear Seat Unit Removal and Installation

Removal
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
Rear Seat Heater Unit
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Disconnect the unit connector (A).

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Unit / Removal and Installation / Removal illustration

3.
Remove the unit (A) after removing the screws.

Body (Interior / Exterior / Electrical) — Rear Seat / Rear Seat Unit / Removal and Installation / Removal illustration

Installation
Warning
•
When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
•
When working on the high voltage system or related components, be sure to observe and be aware of the "Safety Precautions, Cautions and Warnings". If not, it may cause serious accidents due to electric shock or short circuit.
•
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
1.
Install in the reverse order of removal.
2.
When replacing the seat unit, perform Over The Air (OTA) controller S/W update with KDS.
(Refer to Security & Vehicle Ignition System - "Over The Air (OTA)")

Other information:

Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Precautions for accident vehicle

Precautions for accident vehicle Electric vehicle includes a high voltage battery, which can lead to serious accidents such as short circuits or electric shocks if touched incorrectly.

Kia EV6 (CV/CV1A) 2022-2026 Workshop Manual: Emergency Stop (ES)

Emergency Stop in the Kia EV6 is designed to assist when the system determines that the driver may be unresponsive. When this condition is detected, the system helps keep the vehicle centered in the lane and supports controlled deceleration so the vehicle can be brought to a stop more safely within the driving lane. Detection sensor For the sensors used by this function and their exact locations on the Kia EV6, refer to the Detecting sensor(s) section.

Contents

Categories

 
Copyright © 2026 Kia EV6 Manuals ⏱ 0.0221